Push/Pull Cable
Express Push/Pull Cable
Setup
A flat wire-reinforced inner member is located in a conduit, which is formed by an inner-lying inner tube and specially arranged longitudinal wires (linear wire stranding). The linear wires on the other hand (with the exception of types 770) are supported and fixed by a support wire winding. A plastic extrusion is doing the outer coverage of the conduit. For the universal connection of elements, the inner member and conduit are supported with pressed on zinc coated or stainless-steel end parts. The push/pull cables are designed lightly gliding and are supplied with low-friction permanent lubrication. Effective seals protect the moving elements of the push/pull cables against external influences such as spray water, dust and corrosion.
Express Push/Pull Cable (284-V-T05M/T05M-3)
- Push force: 320 N (~ 32 kg)
- Pull force: 540 N (~ 54 kg)
- Travel: 76 mm (~ 3 inch)
- Bending radius: 51 mm
- Low slip-stick effect thanks to teflon coated inner member
- V2A stainless steel connection parts
- M5 thread on end parts
- Diameter of cable fixture: 12 mm (7/16-20 UNF threads, nuts included)
- Seals for protection against dirt, dust and moisture
Express Push/Pull Cable with T-Grip (284-V-NL/T05M-3)
- Push force: 200 N (~ 20 kg)
- Pull force: 250 N (~ 25 kg)
- Travel: 76 mm (~ 3 inch)
- Bending radius: 51 mm
- Low slip-stick effect thanks to teflon coated inner member
- Aluminum T-Grip cap, connection thread M10x1
- Stainless steel connection part
- M5 thread on moving end part
- Diameter of cable fixture: 12 mm (7/16-20 UNF threads, nuts included)
- Seals for protection against dirt, dust and moisture
Cable Series
Cable Series is the basis of Remote Control System. Cable series are offered in five sizes. In the standard version, three end part configurations are designed. There are six different types of travel, which can be combined with three different seals. A multitude of additional possibilities for configuration and variation in the setup of the cables are possible in order to create a solution that fits to the respective application.
Series 270
Series 275 and 274
- Series 275 with zinc-coated end parts and stainless steel rod ends
- Series 274 with stainless steel end parts
- Inner member stainless steel reinforced
- Highly efficient
- Remarkably small bend radii
- Extremely smooth
- High travel frequencies
- Colour: blue
- For cable sizes U, V, L and M
- High temperature range from -50° C to + 90° C (constant) and short term up to + 110° C
Series 280
Series 283 and 284
- Series 283 with zinc-coated end parts and stainless steel rod ends
- Series 284 with stainless steel end parts
- PTFE-covered inner member
- Highly efficient without stick-slip effect
- Remarkably small bend radii
- Extremely smooth at high loads
- Colour: blue/yellow marked
- For cable sizes U, V, L, M and H
- High temperature range from -50° C to + 90° C (constant) and short term up to + 150° C
Series 380
Series 383 and 384
- Series 383 with zinc-coated end parts and stainless steel rod ends
- Series 384 with stainless steel end parts
- PTFE-covered inner member
- Highly efficient without stick-slip effect
- Remarkably small bend radii
- Extremely smooth at high loads
- Colour: blue/red marked
- For cable sizes V, L and M
- High temperature range from -50° C to +100° C (constant) and short term up to +170° C
Series 770
Series 775 and 774
- Series 775 with zinc-coated end parts and stainless steel rod ends
- Series 774 with stainless steel end parts
- Attractive pricing
- Highly efficient
- For applications without special requirements
- Colour: black
- For cable sizes U, L and M
- High temperature range from -50° C to + 80° C (constant) and short term up to + 100° C
Bowden Cables
The bowden cable for the transfer of pulling forces is generally manufactured for a specific application case of the individual customer, manufacturer drawings or models.
The exemplary end parts on display on the catalogue pages reflect the wide variety of possibilities for combination.
Exact dimensions and customer-tailored endparts are available upon request.
Control Systems
Contact us for more product information.